適用范圍

適用于不銹鋼水槽平面及板材的平面拋光處理，拋光可達到啞光或鏡面效果。設備結構好，運行平穩，操作方便，各種樣式水槽一次裝夾，按下按扭即可完成整個平拋工序。

Features

Suitable for grinding and polishing the welding seam of stainless steel sink.Polishing can achieve matte or mirror effect.The machine structure is good with stable and easy operation.One time fixing for various kinds of sink.Press the button then it could finish the whole polishing process automatically.

產品概述

CNC水槽打磨拋光?？茩C是利用砂帶拋光的原理，用電機帶動砂帶傳動，對已經焊接好的水槽邊緣進行打磨拋光處理，分兩個工序打磨，即先用粗砂帶把多余的邊框切割或者把比較高的焊點打磨，然后再用細砂帶拋光處理，經過兩個工序的打磨和拋光后基本達到要求；設計采用三菱專業自動控制系統，只需輸入產品位置的坐標數據，啟動設備后砂帶軌跡在預設定的程序中即可自動完成產品打磨、拋光兩個工序，只需人工擺放、取出工件即可。節能、環保、效率高、一致性好，真正解決了水槽打磨拋光用工難題。

Description

This CNC sink grinding special machine utilizes abrasive belt polishing principle.The abrasive belt is driven by electric motor to conduct polishing on the edge of the welded sink.There are two processes for polishing.Firstly,use the coarse abrasive belt to grind the redundant cutting edge and the projection welding spots.Then use the fine abrasive belt to conduct polishing treatment.After these two processes can meet the requirement of sink grinding and polishing treatment.lt is designed to use Mitsubishi professional automatic control system.You only need to input the coordinate data of the product and start the machine,the abrasive belt of the machine will conduct grinding and polishing automatically within the track of preset program.The worker only needs to put and take out the sink.Energy saving,Eco-friendly,high efficiency,good consistency.Solve the labor difficulty for sink grinding and polishing.

技術參數Technical Parameters